Choose an observation
Start with the property you need to investigate. An instrument supplies evidence; it rarely supplies a complete identity. Record the test conditions, the observation and any limitation before comparing possible materials.
Refractometer
Read shadow edges and test the limits of an RI result.
Open lesson → 02 / ExploreDichroscope
Compare two polarised views and change the viewing direction.
Open lesson → 03 / ExploreChelsea Colour Filter
Compare selective transmission under suitable white light.
Open lesson → 04 / ExplorePolariscope
Rotate a specimen and interpret extinction patterns.
Open lesson → 05 / ExploreSpectroscope
Resolve absorption features and compare dispersion layouts.
Open lesson → 06 / ExploreSpecific gravity testing
Use hydrostatic weighing and explore measurement error.
Open lesson → 07 / ExploreUltraviolet examination
Compare excitation conditions and distinguish afterglow.
Open lesson →Build a consistent record
- Examine the specimen and check that the proposed test is suitable.
- Prepare and check the instrument using its operating instructions.
- Record what you observe, including orientation and lighting.
- Repeat where appropriate and compare several independent properties.
Return to the underlying properties
Reflection, refraction, Snell’s Law and dispersion explain much of the instrument behaviour. Polarisation and pleochroism support the polariscope and dichroscope; microscopic inclusions add structural evidence.
Check your understanding
Answer each question before opening its explanation.
1. Can one instrument result establish a gem identity?
Usually not. Compare independent properties and the limitations of each test.
2. What should accompany an observation?
The method, lighting or excitation, orientation, reading and any uncertainty.
3. Why check suitability first?
Mountings, opacity, size, surfaces and instrument limits can make a result unreliable or the test unsuitable.